We endeavor to make our Cisco TelePresence products interoperable with all
relevant standards-based equipment. Although it is not possible to test all
scenarios, the testing on which this data is based covers most common functions
of the listed endpoints and infrastructure.
The following pages describe the software releases that were tested for
interoperability with Cisco TelePresence products. The results are grouped by
product range. It is not possible to guarantee that all the models listed in the
Product(s) column have been tested with the specified software release, although
to the best of our knowledge we believe that all such models are interoperable
with the associated software release. The absence of a device or release does
not imply a lack of interoperability.
Cisco TelePresence System TX1310 65 software version TX6.0.3
To see all interoperability information for all 6.0.x releases, click all tabs associated with that release (for example, 6.0.0 and 6.0.2, if visible).
Cisco TelePresence
Product(s)
Software release
Comments
Cisco TelePresence Multipoint Switch (CTMS)
1.9
When in a multipoint call using CTMS between EX systems running TC5 or TC6 and TX9000 or TX9200 systems, the presentation rate is limited to 5 frames per second (fps).
Cisco TelePresence Multipoint Switch (CTMS)
1.8
When in a multipoint call using CTMS between EX systems running TC5 or TC6 and TX9000 or TX9200 systems, the presentation rate is limited to 5 frames per second (fps).
Cisco TelePresence Server
3.1
Tested TIP:
No issues found
Tested CUCM to VCS H.323 interworking:
Interworking calls from this endpoint is not recommended
We recommend that you your TX systems be running a minimum TX version of 6.0.3 with TelePresence Server software 3.1.
Feedback