Cisco TelePresence

Interoperability Database

Warning - In preview mode

Hierarchical Navigation

We endeavor to make our Cisco TelePresence products interoperable with all relevant standards-based equipment. Although it is not possible to test all scenarios, the testing on which this data is based covers most common functions of the listed endpoints and infrastructure.

The following pages describe the software releases that were tested for interoperability with Cisco TelePresence products. The results are grouped by product range. It is not possible to guarantee that all the models listed in the Product(s) column have been tested with the specified software release, although to the best of our knowledge we believe that all such models are interoperable with the associated software release. The absence of a device or release does not imply a lack of interoperability.

Cisco TelePresence System 500-32 software version 1.9.2(19)

Show data for version: TX 6.1.4TX6.1.1TX6.0.3TX6.0.01.9.x1.9.2(19)1.9.2

Cisco TelePresence

Product(s) Software releaseComments
Cisco TelePresence Conductor XC2.0
Cisco TelePresence MCU Series products 4.4

Tested CUCM to VCS and CUCM to MCU.

  • Calls on the CUCM to VCS path between this endpoint and the MCU 5300 Series show video corruption on the endpoint (CSCtz98039).
  • Video corruption is present on the PIN entry screen when this endpoint connects to an MCU in HD mode on the CUCM to VCS call path (CSCud21804).
  • Video on the endpoint appears with a distorted aspect ratio and a black border when the MCU is configured to allow only 4:3 outgoing aspect ratios. Work around this issue by not restricting the MCU to 4:3 only (CSCud34601).
  • This endpoint does not respond properly to commands to mute/unmute audio/video from MCU. Using this feature with this endpoint may lead to unexpected behavior (CSCud21801).
Cisco TelePresence MCU Series products 4.4

Tested CUCM to VCS and CUCM to MCU.

  • Video to CTS 3000 is periodically corrupted (CSCtx91858).
  • This endpoint does not respond properly to commands to mute/unmute audio/video from MCU. Using this feature with this endpoint may lead to unexpected behavior (CSCud21801).
Cisco TelePresence MCU Series products 4.4

Tested CUCM to VCS and CUCM to MCU.

  • The endpoint does not respond properly to commands to mute/unmute audio/video from MCU. Using this feature with this endpoint may lead to unexpected behavior (CSCud21801).
  • Video appears with a black border when the MCU is configured to allow only 4:3 outgoing aspect ratios. Work around this issue by not restricting the MCU to 4:3 only (CSCud34601).
Cisco TelePresence MCU Series products 4.4

Tested CUCM to VCS and CUCM to MCU.

  • The CTS 1300-47 endpoint does not respond properly to commands to mute/unmute audio/video from MCU. Using this feature with this endpoint may lead to unexpected behavior (CSCud21801).
Cisco TelePresence System EX Series, Cisco TelePresence System EX60, Cisco TelePresence System EX90 TE6.0

No issues