Cisco TelePresence

Interoperability Database

Warning - In preview mode

Hierarchical Navigation

We endeavor to make our Cisco TelePresence products interoperable with all relevant standards-based equipment. Although it is not possible to test all scenarios, the testing on which this data is based covers most common functions of the listed endpoints and infrastructure.

The following pages describe the software releases that were tested for interoperability with Cisco TelePresence products. The results are grouped by product range. It is not possible to guarantee that all the models listed in the Product(s) column have been tested with the specified software release, although to the best of our knowledge we believe that all such models are interoperable with the associated software release. The absence of a device or release does not imply a lack of interoperability.

Cisco TelePresence Conductor software version XC2.2

Show data for version: XC4.4XC4.3.7XC4.3.6XC4.3.5XC4.3.3XC4.3.2XC4.3.1XC4.2XC4.1XC4.0XC3.0XC2.4XC2.3XC2.2.1XC2.2XC2.1XC2.0XC1.2

Cisco TelePresence

Product(s) Software releaseComments
4200 series, 4500 series, 8000 series, Cisco TelePresence MCU Series products 4.3

A number of Conductor XC2.2 features are not supported in version 4.3
Cisco IP Video Phone E20 TE4.1.1

No issues found.
Cisco TelePresence MCU Series products 4.4
Cisco TelePresence MX200 TC6.1

TC6.1.1.7d7af15 was tested
Cisco TelePresence Server 3.1

No issues found.
Cisco TelePresence Server 3.0

A number of Conductor XC2.2 features are not supported in version 3.0
Cisco TelePresence SX20 TC6.1

TC6.1.1.7d7af15 was tested
Cisco TelePresence System 1700 MXP F9.1.2

No issues found.
Cisco TelePresence System EX Series TC6.1

TC6.1.1.7d7af15 was tested.

No issues found.
Cisco TelePresence System TX9000 1.9.3(44)

In a deployment with a TelePresence Server, on the TelePresence Conductor you must select Full HD (1080p 30fps / 720p 60fps video, multi-channel audio) or a custom quality setting that has an audio quality level of multi-channel, otherwise insufficient resources will be allocated to display multiple screens.
Cisco TelePresence Video Communication Server (VCS) X7.2.2

iX passthrough is only supported when using the Cisco VCS as a proxy, not when using the Cisco VCS's back-to-back user agent (B2BUA).

Cisco

Product(s) Software releaseComments
Cisco Unified Communications Manager 8.6.2

Calls fail if ActiveControl has been enabled
Cisco Unified Communications Manager 9.0.1

No issues found.
Cisco Unified IP Phone 9951, Cisco Unified IP Phone 9971 9-3-1-33

No issues found.
Cisco Unified IP Phone 9951, Cisco Unified IP Phone 9971 9-3-1-33

No issues found.