NTP servers

It is important that your Meeting Management is always synchronized with your Meeting ServerCall Bridges, so we recommend that your Meeting Management uses the same NTP servers as your Meeting Server deployments. You can connect up to 5 NTP servers to Meeting Management, and you can monitor their status on the Settings page, NTP tab.

Note: The time displayed is for your Meeting Management server and may differ from the time settings on your computer.The offsets shown are between each connected NTP server and your Meeting Management server.

To add an NTP server:

  1. Go to the Settings page, NTP tab.

  2. Add NTP server.

    Note: If you type in IPv6 addresses, do not use square brackets here.

  3. To save the changes, Restart your Meeting Management.

 

 

 

Help for Cisco Meeting Management 2.8 Copyright © 2019 Cisco Systems, Inc Legal information